nike roshe run, nike shox nz, michael kors borse nike free trainer 5.0, occhiali da vista ray ban, louis vuitton outlet online, nike italia, ralph lauren italia, nike air max saldi, mbt scarpe,
KEI YU
 
 
 

 



Prodcut NoTruSonic II
Product NameTRUSONIC II ULTRASONIC FLAW DETECTOR
Price

Back 
TelG886-02-26534530
        886-02-26546891
E-mailGsale@keiyu-ndt.com.tw
trusonicII(2017).pdf 
DIGITAL ULTRASONIC FLAW DETECTOR
 
TruSonicII hand held and light weight Digital Ultrasonic Flaw Detector offers you all the features of larger, heavier instruments, such as high resolution with the usual high gain reserve.
In addition to this, the instruments ease work by the inclusion of extras. For example in weld testing the exact flaw location is evaluated; all features are available for demanding thickness measurements.
User-friendly programs for display evaluation with 3 or 4 Distance Amplitude Curves (DAC), +6dB DAC and for AVG evaluation are available as standard.
T-Scan thickness display and optional Encoder B-scan Scanner
Welding simulation map for welding section display defect location for report printing
The light weight 2.5 kg, including batteries!
The ergonomic design and operational ease will amaze you.
Large Color TFT display. A bright, 400 cd/m2 high contrast screen enables you to read your measurements data even under poor lighting conditions. The A-Scan, the instrument settings and the digital measurement readings are all displayed simultaneously.  
The instruments can withstand the toughest condition. After testing, you will certainly wish to use the many documentation possibilities to record all calibration parameters and test results. It could storage 500 data inside.
 
INSTRUMENTS MEET YOUR NEEDS
 
The high refresh rate (60Hz) of the bright and high-contrast TFT screen is reminiscent of the successful analog tubes.
You can read your measurement readings quickly and clearly. If a measurement is made when you are at some distance from your instrument, simply display the reading in large digits.
The pulse repetition frequency can be reduced. By doing this, phantom echoes can be reliable avoided which could occur when testing larger test objects.
The instrument can store data sets, including all instrument parameters, test results and A-Scans and can be recalled at any time.
You soon feel at ease, because you operate them in accordance with your proven standards for digital instruments.
 

FEATURES

joystick control set and adjust all parameters
Welding simulation map
Large thickness reading display
DAC curve with DAC alarm
Curve DGS ( optional)
Positive, negative, and minimum depth alarms
Filled waveform trace display
Separately Gate A and Gate B setting with alarm        
Peak or Flank measurement
Freeze and Peak memory mode
Automatic calibration on two points
Pulse repetition frequency control
Displays sound path value, surface distance and depth to flaw
 in angle beam inspections
Connects to PC via USB cable to download data and make    
 certificates
 
TECHNICAL SPECIFICATIONS
 
 
Calibration                           range:
From 25 to 1000 mm (steel long)
Sound velocity:
2 fixed values(3230m/s,5920m/s) and adjustable in the range 1000 to 9999m/s in steps of 1m/s
Probe delay:
0 to 2000 mm
Gain:
100dB, adjustable in steps of 0.1/2/6/12/20 dB
Fine Gain:
0.1 dB
Frequency range:
0.5-10 MHz wide band
Pulse repetition frequency:
10-1000Hz, depending on the set calibration range and the probe delay for adjustable
Test methods:
Pulse echo mode and Thru mode
Pulse Voltage:
300 V negative spike
Damping:
120 ohm
Echo presentation:
Full wave
Suppression:
Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display
DAC:
Recording of up to 8 reference echoes, 40dB dynamic range,
display of the DAC curve 3 or 4 DAC curve can be setting
DGS:
Measurement technique that allows defects echoes through the evaluation of diagrams DGS associated with particolar probes and materials.
Data storage:
500 A-scan Trace Data sets in the FLASH memory, with additional alphanumeric identification and directory function
Units of measure:
mm or inch
Interface:
USB
 
 
Probe connector:
Two LEMO 1 connectors or BNC Connector
Power supply:
Removable 13.2Ah/ 3.7 V Li-ion Battery or mains supply via an
external mains power/charger unit JBD15-A2S
Operational period:
Up to 6 hours with Battery ( select LCD low bright )
Operating temperature:
-5° C +65° C
Storage temperature:
-40° C +75° C (without batteries)
Display size:
110mm × 62mm (W×H)
Dimensions:
145mm × 210mm ×4 5mm (H×W×T)